Explore the measurement, analysis and process equipment used in motor and generator maintenance, repair, overhaul and testing.
Used for vibration analysis, fault diagnosis and operating-stability assessment on rotating equipment.
Measures very low resistances with high precision to verify connection and winding quality.
Measures the ohmic resistance of windings and busbars to identify phase imbalance and contact resistance.
Measures winding insulation resistance and assesses ageing and moisture effects.
Detects winding-insulation defects using surge and high-voltage testing.
Verifies insulation strength under high AC voltage.
Detects iron losses and hot spots in stator lamination stacks.
Measures bearing insulation to prevent damage caused by bearing currents.
Uses waveform comparison to identify turn-to-turn winding defects.
Measures fundamental electrical values including voltage, current and resistance.
Checks the direction and polarity of motor-pole connections.
Provides precision neutral-axis adjustment on DC machines.
Visualises thermal distribution to identify abnormal heating and contact problems.
Quickly measures surface temperature without contact.
Provides endoscopic visual inspection of hard-to-reach internal areas.
Enables rotating parts to be visually inspected as though stationary.
Measures stray currents in shafts and bearings to prevent premature damage.
Reduces vibration by correcting imbalance in rotors and rotating equipment.
Enables on-site balancing without dismantling equipment.
Measures ovality (deviation from roundness) in slip rings and commutators.
Provides precision outside-diameter measurement on large shafts and frames.
Provides precision inside-diameter measurement for bearing housings and large bores.
Measures shaft-end runout and axial/radial deviations with high precision.
Uses laser alignment to correct shaft misalignment between the motor and driven equipment.
Tightens bolted connections to the manufacturer-specified torque.
Provides controlled heat treatment with more than 20 tonnes of capacity at an operating temperature of 700°C.
Provides winding drying and process control with more than 60 tonnes of capacity at 250°C.
Improves winding durability through vacuum- and pressure-controlled impregnation.
Provides controlled, standards-compliant winding production for different motor types.
Precisely forms medium-voltage coils to the required geometry.
Cures resin-rich coils under controlled pressure and temperature.
Provides a controlled supply for load testing repaired equipment.
Uses controlled pressure to install or remove bearings, couplings and components.
Provides safe in-workshop handling and positioning of heavy equipment.
Uses controlled induction heating for damage-free bearing installation.
Applies controlled heating for coupling and interference-fit assembly.
Cleans windings and surfaces with dry ice without abrasion.
Applies controlled force to remove seized bearings and couplings without damage.
Provides safe lifting of heavy equipment with 115 tonnes of total capacity.
Provides clean, high-quality welds on precision components.
No equipment was found in this category.
We provide professional technical support for motor and generator maintenance, overhaul and testing.
