Testing and Measurement Services
Our advanced test equipment and experienced engineers provide comprehensive testing and measurement. Predictive-maintenance analysis identifies developing faults before failure.
Our Testing and Measurement Services
Explore all services in this category.
Dynamic Balancing
Dynamic balancing to reduce vibration and improve operating stability in rotors and rotating equipment.
View DetailsContinuous Monitoring
Continuous condition monitoring of critical equipment based on vibration and temperature.
View DetailsResonance Measurement
Identification of structural resonance frequencies and vibration-risk assessment.
View DetailsInsulation-Resistance Measurement
Measurement and assessment of winding insulation resistance using a megohmmeter.
View DetailsResistance and Inductance Measurement
Phase-imbalance checks through winding resistance and inductance measurement.
View DetailsSurge Test
Detection of winding-insulation defects using surge voltage.
View DetailsHi-Pot Test
Verification of insulation strength under high voltage using a Hi-Pot test.
View DetailsDAR Test
Assessment of insulation moisture and contamination using the dielectric absorption ratio (DAR).
View DetailsPI Test
Long-duration assessment of insulation quality using the polarisation index (PI).
View DetailsBar-to-Bar Test
Detection of bar-to-bar resistance differences in commutator and winding segments.
View DetailsCore-Loss Test
Detection of iron losses and hot spots through core-loop testing.
View DetailsBroken Rotor Bar Test
Detection of cracked and broken bars in squirrel-cage rotors.
View DetailsSlip-Ring and Commutator Ovality / Shaft-End Runout Measurement
Measurement of slip-ring and commutator ovality and shaft-end runout tolerances.
View DetailsSurface-Roughness Measurement
Measurement and assessment of surface roughness (Ra) on shafts and bearing surfaces.
View DetailsSpring-Tension Measurement
Optimisation of commutator contact through brush-spring tension measurement.
View DetailsThermal Imaging and Heat Mapping
Thermal-distribution analysis and detection of abnormal heating using a thermal imaging camera.
View DetailsPartial Discharge Test
Insulation-ageing analysis through partial-discharge (PD) measurement on medium-voltage windings.
View DetailsOn-Site Vibration Analysis and Bearing-Performance Testing
Early fault detection through on-site vibration analysis and bearing-performance testing.
View DetailsGrowler Test
Growler testing to detect short circuits in stator and rotor windings.
View DetailsRotor-Shaft Blocking Test
Mechanical-integrity verification through rotor-shaft blocking tests.
View DetailsFlame-Path Roughness Test
Inspection of flame-path roughness and tolerances in explosion-proof enclosures.
View DetailsRequest a Complimentary Site Survey and Quote
Our expert team will contact you as soon as possible.